|
Re: C notch dillema
Lolife69 Thank you for all your input. Am I on a wild goose chase here or is the canti setup the way to go. I read a lot on it and was under the impression I would be able to get lower with that.
The reworking of the c notch is not a problem. I intend to plasma cut out the old notch and fabricate my own or maybe buy one and reinforce it with thicker inner box. I intend to weld the entire thing in. relocating the shocks may be a little tricky as the picture shows the tank on the left side of the pic. The exhaust will be another piece of the puzzle.
Thanks again
IC
|