The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Question about 1964 stepside rear fender eyebrow or scallop for tail light ?

Camuchi · 03-01-2015, 10:52 PM

I just noticed that the rear fenders only 1964 gmc are different where the tail light mounts. Drivers side has a flat recess with an arch above sure the light is mounted- positions the light at a 90 degree angle to the road.
On the passenger side it has nothing , just the curve of the fender with light mounted in a hole in the fender,makes it about 110-120degrees to the road (pointing slightly upward).

Just learning about these trucks, can some one educate me?

Thanks

03-01-2015, 10:52 PM	#1
Camuchi Registered User Join Date: Mar 2012 Location: Fairhope Alabama Posts: 10	Question about 1964 stepside rear fender eyebrow or scallop for tail light ? I just noticed that the rear fenders only 1964 gmc are different where the tail light mounts. Drivers side has a flat recess with an arch above sure the light is mounted- positions the light at a 90 degree angle to the road. On the passenger side it has nothing , just the curve of the fender with light mounted in a hole in the fender,makes it about 110-120degrees to the road (pointing slightly upward). Just learning about these trucks, can some one educate me? Thanks Attached Images