The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Need a little help.. new style CPP drop spindles

Possmguts · 03-07-2015, 09:00 PM

I installed the disks and calipers so I could mount my wheels and found that there is not enough clearance to be able to install the tie rod ends. Cant even get it in the hole because the wheels are so close to the spindles.

These are the "New Style" CPP spindles they offer now to be able to use the disks from 71-72 but still use the 67 steering linkage.

Is anyone else running these? If so what back space and size wheels are you using up front?

03-07-2015, 09:00 PM	#1
Possmguts Registered User Join Date: Nov 2014 Location: Columbiana Ohio Posts: 1,210	Need a little help.. new style CPP drop spindles I installed the disks and calipers so I could mount my wheels and found that there is not enough clearance to be able to install the tie rod ends. Cant even get it in the hole because the wheels are so close to the spindles. These are the "New Style" CPP spindles they offer now to be able to use the disks from 71-72 but still use the 67 steering linkage. Is anyone else running these? If so what back space and size wheels are you using up front? Attached Images __________________ "Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8