View Single Post
Old 03-24-2015, 08:54 AM   #9
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,119
Re: Steering column swap w/cruise

Quote:
Originally Posted by LeesTruk View Post
Okay, one more question here, before I put this to bed. I've gotten ahold of a '05 Tahoe (my engine/TAC application) cruise schematic. I can "see" the integration of the TAC module and my cruise stalk wiring (per your guidance), and I can follow the TAC output to the PCM. PCM connector C1 pin 58 is the output to the IPC module as serial data when the cruise command is set. Can this be used as the voltage required to drive a light bulb for cruise set indication? Thanks

Lee
No, the serial data wire doesnt put out a voltage when the cruise is set, it doesnt work that way.
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote