[JRANGER]

Well i dont know how it happened but some how all of sudden with the new actuator and such the rear driver quarter moves up and down properly. The wheels dont pop off or anything. I havent touched it since greasing it up and playing with it over the weekend so its weird. After that worked out i adjusted it forward on the top and pull the bottom in to push the top out. BOOM!! The door and quarter seal. Problem solved!!! Tested the cowl again, still leaking....The end where i cant really reach is being an issue and the spatula didnt do the trick after 2 tried. I pushed my and in and gave it another try. Full of seam sealer so maybe tomorrow i will have a successful water test! BLAH!!!

Eitherway it is some progress and im just a couple steps away from being confident i can install interior without moisture issues