My 1955 Chevy 3100 build
I decided to run some conduit for the wiring inside the frame prior to installing all of the boxing plates. I ran one conduit to the front of the truck and one to the rear. I terminated both conduit runs toward the front of the cab.
The ends of the 90 degree elbows are rotated downward to keep the conduits from holding water. I will seal the ends after I have the wiring run through them but figured it couldn't hurt.
The work doesn't look too great in these pics. The conduit and mounting tabs didn't seem to weld very well, but everything is secured tightly and won't be rattling around later. After all of the conduit was installed I hit everything with a couple of heavy coats of cold galvanizing compound.
|