Quote:
Originally Posted by 55 Chevy Dave
My plan (which may or may not work) to get the wiring through the 90 degree elbows is to push a piece of welding wire from one end of each conduit out to the other end and then tie the wires to the end of the welding wire and pull it back through. Combined with plenty of lube at each 90 and I believe it will work. Guess we will all find out in a later post!
|
Your plan should work fine, I would have a 'helper' feeding and bending the wire into the hole as you are pulling gently from the other end... it may take a bit of time but it will get there....