Quote:
Originally Posted by Super_Dave
I am running a new Edelbrock 4BBL. Mine did something similar at idle. In neutral or running through the gears, all was fine. We had one of the needles on the carburetor that seemed to have something in it. We removed the needle and sprayed some cleaner in the hole, then a blast of air... took about 3 or 4 tries but it eventually settled down.
Ran each needle down until the motor started to run rough, then backed off until it smoothed out. Been running fine ever since. I will be taking it to my buddy who runs a carburetor tune up shop and races Pro Stock... have him hook me up to his "tune-o-matic" diagnostic machine and dial in the carb and timing and all should be excellente'.
|
What is the difference with using a carb versus throttle body? Basically, do I just take the throttle body the intake manifold and put the carb on? Just wondering if it will bolt right up. I am limited on mechanical knowledge.
I have a edelbrock 1406 on my truck that I can swap out, significant gas difference?
__________________
Rest In Peace:Mikhail {Mickey Rooney} Alpha 2/5/13 Omega 7/22/14 10:28AM I love you tremendously and outragiously Superpuppi Thai Ridgeback...The most intelligent dog known to me.
Don't mess with my truck, my momma or my money...not necessarily in that order. ©
Stand for something or fall for anything.
[LIST][*]'98 Bourbon St. Brawl ©2010