p/s mounting w/ headers....how to?
I have a '71 c10 that i drag race exclusivley that has oem p/s with long water pump brackets, trying to figure out how to mount the pump. I have the oem cradle the pump sits in and the slotted adjuster bracket with three holes that mounts to the front of the pump, but dont have the one piece that attaches to the exhaust manifold bolt. Dont even know if it would help if i had it because im running long tube headers? Anyone else run into this problem or know how to remedy it?
__________________
'71 LWB c10-" WORK" in progress
385 ci 4 bolt (4.040 bore), scat 6.0" forged h beams,scat forged crank 3.750, speed pro 5cc flat top, clevite bearings, .039 head gaskets,comp xr288hr 110* 288/294adv. 236/242@.50 555/576 lift, pbm hyd roller lifters, chad spiers 215cc imp. heads , comp 1.6 roler rockers, comp magnum push rods, edelbrock victor jr. single plane intake p&p (1206 gasket matched), quickfuel 750R DP , th 350 trans, 5.14 gear, 3000 stall
2012 best 1/8- 7.70 @ 87mph 1.70 60' (lil better)
2013 best 7.39
2014 best-7.38
New for 2013-strange rear coilovers, headman 1-3/4 headers, 5.13 r&p, .060 aluminum bed floor, 15x14 holeshots w/ 31x18.5 hoosier dot pro's, 15x4 holeshots w/ 26x5.5 m/t skinnies and 200+#'s in body weight loss & 6 point cage
|