[hugger6933]

Not near as hard as it used to be the older T-trucks[most called the S-10 4x4's] your right you had to take the whole knuckle loose to change an axle. Not anymore At most you need to pull the shock and sway end link. Also both axles are the same so that makes things better.If you have a way of getting under it you really don't even have to take off the wheels. Just the center cap and spindle nut cover, then the axle nut[36 mm] then the six axle bolts[15 mm]then it will slide out to the inside and front. Once you get started you will see that the end link and shock are all there is to it. much better. Jim