The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - "Albert" -- 1949 AD, S10 Chassis

HUSSEY · 04-16-2015, 01:49 PM

Once I got the motor set on the chassis I built the exhaust from mandrel u-bends back to the muffler. I’m running Headman S10 V8 conversion headers. The y-pipe is 2.5 inch out of the headers with a 3 inch pipe back to the muffler. The muffler is a Flowmaster 40 Series and has dual 2.5 inch pipes out. Once I get the bed and rear bumper on I’ll figure out the routing back and under the bumper.

04-16-2015, 01:49 PM	#28
HUSSEY Registered User Join Date: May 2013 Location: Kansas City Posts: 572	Re: "Albert" -- 1949 AD, S10 Chassis Once I got the motor set on the chassis I built the exhaust from mandrel u-bends back to the muffler. I’m running Headman S10 V8 conversion headers. The y-pipe is 2.5 inch out of the headers with a 3 inch pipe back to the muffler. The muffler is a Flowmaster 40 Series and has dual 2.5 inch pipes out. Once I get the bed and rear bumper on I’ll figure out the routing back and under the bumper. __________________ My 49 AD Build / S10 Chassis -- Thread -- Pictures -- S10 Conversion Mounts Last edited by HUSSEY; 08-25-2015 at 04:08 PM.