View Single Post
Old 04-22-2015, 10:31 AM   #2
1774btcrew
Senior Member
 
1774btcrew's Avatar
 
Join Date: Jun 2009
Location: Phoenix AZ
Posts: 4,604
Re: Column repair, won't start, lock doesn't work

You will need to pull the ignition lock cylinder back out. The metal spring on the left the goes in the gear for the rack goes in the slotted part of the black gear. A good way to make sure everything is working correctly is to remove the actual ignition switch at the bottom of the column. Move the rod up and down and watch if the pieces on the rack are turning as they should. If not, you are going to have to tear it back down and make sure everything lines up. Basically make sure from the bottom of the column by moving the rod it is making the pin for the lock plate move in and out.
__________________
AZPartsLocators on Instagram

1972 Cheyenne Super Short Bed big block "Blackie"
1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog"
1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.
1774btcrew is offline   Reply With Quote