Thanks all for taking the time to reply
Quote:
Originally Posted by 656mx
Are they drop springs in it? Is the sway bar for a lowered truck or stock? I assume theirs not much spring drop there because you have full size bump stops. Maybe you need to run the stock front mounts for the sway bar to correct the angle. The ones for lowered trucks mount the bar higher in the front.
|
Yes they are drop springs from ECE and drop spindles and the bar is for a lowered truck well that is what i ordered. It is there 4/6 drop kit.
Quote:
Originally Posted by min
It looks like the sway bar is on upside down.
|
Tech support @ ECE says it is on the right way
Quote:
Originally Posted by michael bustamante
Can you post a pic of the bushings and horseshoe clamps?
|
Will do when i am next down the workshop
Quote:
Originally Posted by chevy_mike
I think this is the problem. I believe the angle at the arms should point upwards.
|
That is what i have been saying to ECE over my Emails to them, they say the lower arms are bad as the holes are in the wrong place. I just don't buy that as the holes on the clamps line up perfectly with the holes in the lower arms, you can drop the bolts though with your fingers and get the washers and nuts on, how can they be in the wrong place.
Next time i am down there i will try the bar the other way around and see what it looks like.