The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - [Pics]Bagged 83 C10 at a local show today..

phantom dually · 02-08-2004, 01:12 PM

I really doubt that these trucks will lay rocker without any major mods. The crossmember will hit first then you have the tranny member to worry about. After that you have to notch the rear to get any size of rim under the truck. Dont let the pics fool you. The guy actually has alot of time in his truck but IMO he didnt take the time to clean it up as much as I would have. I think that the crossmember mod as well as other mods required are major mods and cost $$$$$

02-08-2004, 01:12 PM	#22
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	I really doubt that these trucks will lay rocker without any major mods. The crossmember will hit first then you have the tranny member to worry about. After that you have to notch the rear to get any size of rim under the truck. Dont let the pics fool you. The guy actually has alot of time in his truck but IMO he didnt take the time to clean it up as much as I would have. I think that the crossmember mod as well as other mods required are major mods and cost $$$$$ __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448