Quote:
Originally Posted by akqj9
how hard are these to install? What are the steps? thanks
|
Starts with unplugging the switch from the harness under the dash and removing the steering wheel. Once the wheel is off, you will have access to the screw that holds the turn signal lever on. Remove the lever. There are three screws that hold the turn signal switch in place. I find it easier to also remove the column cover ( 2 screws under the column)to allow easier access to reroute the switch couplings back through also. The switch cup that mounts to the column and holds the turn signal switch will rotate counter clockwise (part 36 in the 2nd diagram) and then you can remove the switch from the column. Reinstalls in the opposite order.
The 2nd diagram is from a 71 column, but the parts are in the correct order. Hope this helps.