View Single Post
Old 05-20-2015, 12:03 PM   #18
1970pelle
Registered User
 
1970pelle's Avatar
 
Join Date: Sep 2007
Location: N.E. Florida
Posts: 500
Re: Exhaust question.

The only thing with flex pipe is it doesn't crimp tight when clamping. when used 90% of the time. Try if you can buy a couple of the already bent pieces of pipe to obtain the height you need. Rather than using the flex pipe. It may work out a little easier on the pocket that way. I would try and get the mufflers behind the transmission and dump them out just before the rear diff. If you run turn downs it will help with noise control.

Its a shame your not close to me. I would give you the exhaust off my truck. I took it off during the crate engine install, and I'm going with a all new system.
__________________
1985 IROC Z28 190HP TPI 305,700r4,T-tops,rear trac lock, Black on lite gray, 16in Z28 wheels
2007 Lexus ES350 (wifes)
1984 CJ7 with 1995 HO4.0L MPI, 2 1/2 OME YJ Lift





“There is no limit to the amount of good you can do if you don't care who gets the credit.”
― Ronald Reagan

Last edited by 1970pelle; 05-20-2015 at 12:05 PM. Reason: added more info.
1970pelle is offline   Reply With Quote