Re: Got one.
Latest update. Been humming and haaaing about going softtopper Full time or keeping the hard top. I figures I should at least have the hard top correct, so I had to do a couple of crack repairs in the rails before it gets properly refinished enough to paint. i failed to get a pic of the crack, but there was one on each side. I use marine epoxy on glass cloth as its flexible and SUPER tough. Sand down about 1mm and 3/4 inch or more either side of the crack, cut a piece of Fiberglass to fit. Use epoxy and a sheet of paper on top to enable me to use a clamp. Remove wood, wet and rub off paper and minimal sanding is needed.
|