The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

elk hunter · 02-10-2004, 05:45 PM

we did not move the motor forward due to weight distribution and pan clearance. this puts the pan sump over the front axle. the list of changes for moving the transfer case back is lengthen front driveline and shorten the rear. you also need to cut the trans hump to clear the shifter. we cut that so we could weld the cut peice to the front of the hole to retain the stock shift boot. you will need to replace your carpet also.

02-10-2004, 05:45 PM	#6
elk hunter Registered User Join Date: Dec 2003 Location: oregon city, or Posts: 164	we did not move the motor forward due to weight distribution and pan clearance. this puts the pan sump over the front axle. the list of changes for moving the transfer case back is lengthen front driveline and shorten the rear. you also need to cut the trans hump to clear the shifter. we cut that so we could weld the cut peice to the front of the hole to retain the stock shift boot. you will need to replace your carpet also. __________________ yeah, but how's it wheel?