Re: Family Project 65 C10 SWB "Old Blue"
So....I got all my suspension parts in last week, but I've been trying to figure out a safe way to disassemble the front end with the thing stripped down to the frame. There's no weight to compress the spring with a jack, and all of the compressors I have access to won't fit to compress the spring. Here's what I settled on as a solution. I drilled out one of the body mount washers just enough to pass the bolt of the spring compressor. I also used an old pulley to add some width. I'll run this up through the hole in the bottom of the lower a-arm and compress down from the top of the spring. Problem solved, I hope!
|