The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

XtechX · 05-31-2015, 06:17 PM

It seems that my blinker switch is in need of some repair.
1965 c10, 3 on the tree all original.
Where the blinker lever screws to the inner turn signal cam is cracked right down the middle where the screw goes in and needs replaced. Can the cam itself be taken apart from the rest of the plastic assembly inside or does everything in there need replaced? It just seems that it should come apart at the pivot point.
Any input on my problem would be greatly appreciated
Thanks, Roy

05-31-2015, 06:17 PM	#1
XtechX Registered User Join Date: Jan 2011 Location: Edmore, Michigan Posts: 300	Turn signal switch help It seems that my blinker switch is in need of some repair. 1965 c10, 3 on the tree all original. Where the blinker lever screws to the inner turn signal cam is cracked right down the middle where the screw goes in and needs replaced. Can the cam itself be taken apart from the rest of the plastic assembly inside or does everything in there need replaced? It just seems that it should come apart at the pivot point. Any input on my problem would be greatly appreciated Thanks, Roy __________________ Opportunity usually comes disguised....As hard work!!!