The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

woody82 · 06-14-2015, 11:09 AM

The bearing I bought from Napa had what appeared to be a spacer ring that came with it approx.3/16 wide I put it on the shaft first then the bearing that put the holes an inch or more off so that was 20 bucks down the drain.

06-14-2015, 11:09 AM	#2
woody82 Registered User Join Date: Jun 2014 Location: Bllomfield Iowa Posts: 49	Re: Tranny question. The bearing I bought from Napa had what appeared to be a spacer ring that came with it approx.3/16 wide I put it on the shaft first then the bearing that put the holes an inch or more off so that was 20 bucks down the drain.