The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - GM Frame build - Observations and question about cent bolt for leaf springs.

**71CHEVYSHORTBED402** · 06-18-2015, 01:00 AM

I'm confused. The mount (plate) where the center bolt goes through is welded to the axle, and there's only about 3/8" clearance between the mount and axle. So unless I'm missing something, there's NO WAY to get that bolt through the mount from the bottom. Is it possible the only way is to cut the mount, slide in the bolt and then weld it back on? Doesn't seem right. Note: I'm quite sure it's stock. Stock option from what I'm hearing, but I've also heard the Custom Deluxe came with leaf springs instead of coils.

06-18-2015, 01:00 AM	#7
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,385	Re: GM Frame build - Observations and question about cent bolt for leaf springs. I'm confused. The mount (plate) where the center bolt goes through is welded to the axle, and there's only about 3/8" clearance between the mount and axle. So unless I'm missing something, there's NO WAY to get that bolt through the mount from the bottom. Is it possible the only way is to cut the mount, slide in the bolt and then weld it back on? Doesn't seem right. Note: I'm quite sure it's stock. Stock option from what I'm hearing, but I've also heard the Custom Deluxe came with leaf springs instead of coils. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly guide (kit) for restoring this truck from the ground up, complete with details including full hardware descriptions. Much of the info. applies to all 67-72 GM. My build thread, with some info. about the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025 Last edited by 71CHEVYSHORTBED402; 06-18-2015 at 01:18 AM.