|
Re: Horn wiring bypass
Hello all,
I'm back with a horn still not working. I called CPP and got the plactic contact piece needed for the horn, but still not working. So here is the set up and the problem.
- Picture one is of the column with the contact piece in place before i added the short hub. This is the original set up I believe.
- Picture two is with the short hub installed and the nipple sticking through the provided slot in the short hub. From my understanding the yellow wire hanging down needs to make contact with the silver nipple in the slot. When I try to make the contact All i get is a clicking noise and I can feel the relay under the dash vibrating, but no sound from the horn.
I've tested the relay and horn on a friends truck and they both work, so the issue is somewhere in the connection of the short hub.
Please help.
|