The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**aotte1** · 07-15-2015, 12:55 AM

Rip2174, thanks for the complement, and Flying Low' - do like the caster mod so far.
LMC Door Panels

Next project is to install new LMC door panels, still looking at how to get the chrome door handle opener bezels to fit, on my initial assessment. They fit on the rear corner away from the door opener handle, however, up by the opener handle they stick out about 3/8". So if I cut away the needed panel material by the opener, (how much needs to be cut out?) - will their still be material needed to attach them to the door panel with the factory screws? Looks like a trial cut of a little, to see how much needs removed.

Les

07-15-2015, 12:55 AM	#471
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: 1986 Chevy C10 SWB Step Side Rip2174, thanks for the complement, and Flying Low' - do like the caster mod so far. LMC Door Panels Next project is to install new LMC door panels, still looking at how to get the chrome door handle opener bezels to fit, on my initial assessment. They fit on the rear corner away from the door opener handle, however, up by the opener handle they stick out about 3/8". So if I cut away the needed panel material by the opener, (how much needs to be cut out?) - will their still be material needed to attach them to the door panel with the factory screws? Looks like a trial cut of a little, to see how much needs removed. Les Last edited by aotte1; 07-15-2015 at 01:26 AM.