[OrangeCrush1970]

Wanted to add some pics for reference (396 with Camaro headman headers...1-3/4" primaries). I also wanted to ask if anyone has found an electric fan setup that works with these mounts, big block and short waterpump? I have just under 4" from the waterpump pulley bolts to the 4 core radiator. These mounts pull the motor forward a touch more than the OE big block mounts.
You can see on the passenger side I had to clearance the frame a touch for the header, this was the only mod that I needed. I will also not that these mounts set the engine angle at 6 degrees which presents an issue that I am dealing with now. The best angle I can get with shims under the trans mount is 3 degrees which is great but I now have about 1/8 " clearance between my transmission and the tunnel (low hump).