The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - non-standard size temp sender? Can't find right size replacement

Orange Crate · 07-25-2015, 10:45 AM

What part number did you get from RA? Does it match either one below?

From the link I posted above:

"If you are looking for 3/8 NPT sensors with a standard “spade” type connector and a ground through the body of the sensor GM part number 25036135 is what you need "

"There is also a spade type GM sensor with a ¼" NPT thread available as GM part number 25036292. This part was originally used as an oil temperature sensor on 84-87 Corvettes, and has the same resistance curve as other GM sensors."

Just trying to help.....

07-25-2015, 10:45 AM	#18
Orange Crate Registered User Join Date: Feb 2011 Location: Under the Truck Dreaming Posts: 793	Re: non-standard size temp sender? Can't find right size replacement What part number did you get from RA? Does it match either one below? From the link I posted above: "If you are looking for 3/8 NPT sensors with a standard “spade” type connector and a ground through the body of the sensor GM part number 25036135 is what you need " "There is also a spade type GM sensor with a ¼" NPT thread available as GM part number 25036292. This part was originally used as an oil temperature sensor on 84-87 Corvettes, and has the same resistance curve as other GM sensors." Just trying to help..... __________________ 72 K20 Custom Camper, D60, 14BFF, full roller 406 TPI w custom built ECU and yes..it has tow hooks...and a 5 speed