The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Front Disc's Rubbing on Lower A-Arm

northern 85 · 07-28-2015, 08:15 PM

Thanks you are right,i had noticed this was way off when i first installed the spindles and 2 inch drop coils, top of the tires were way out (more on pass than driverside) so i took all removable shims out,the only one left is cone shaped washer.I just checked with the square and i still have a quarter inch gap on the bottom of the rotor. Am i missing something else?? Thanks for the help.

07-28-2015, 08:15 PM	#36
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Front Disc's Rubbing on Lower A-Arm Thanks you are right,i had noticed this was way off when i first installed the spindles and 2 inch drop coils, top of the tires were way out (more on pass than driverside) so i took all removable shims out,the only one left is cone shaped washer.I just checked with the square and i still have a quarter inch gap on the bottom of the rotor. Am i missing something else?? Thanks for the help.