The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Questions about 1965 C20 front end drum to disc

nelson-ohio · 07-30-2015, 11:46 AM

Need confirm something. I was installing the bearing on the wheel hub, the inner side has this grease seal, which I gently tapped into place. However, it seems to sit slightly above the rim about 1/8", not flush.

I don't remember how it was when I took off the old one, I checked everything and it seems to be seated correctly. But before I put it back on the spindle, just want to have others take a look and see if this is how it should look.

Thanks.

Edit: I found a picture of the old hub when I was taking it off, it shows the seal exactly how it was, so this is confirmed. I should remember to take more pictures.

07-30-2015, 11:46 AM	#78
nelson-ohio Registered User Join Date: Aug 2014 Location: powell, OH Posts: 110	Re: Questions about 1965 C20 front end drum to disc Need confirm something. I was installing the bearing on the wheel hub, the inner side has this grease seal, which I gently tapped into place. However, it seems to sit slightly above the rim about 1/8", not flush. I don't remember how it was when I took off the old one, I checked everything and it seems to be seated correctly. But before I put it back on the spindle, just want to have others take a look and see if this is how it should look. Thanks. Edit: I found a picture of the old hub when I was taking it off, it shows the seal exactly how it was, so this is confirmed. I should remember to take more pictures. Attached Images Last edited by nelson-ohio; 07-30-2015 at 11:04 PM.