View Single Post
Old 08-05-2015, 01:42 AM   #18
swamp rat
Registered User
 
swamp rat's Avatar
 
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
Re: Pine needles in cowl of '72 C20.

One more thing, if you have pine needles visable from the top I guarentee you have pine needles where the vents are inside the cab, the vent doors are removable from the inside, then you can feed a vaccum hose down in the opening, the inside of the vent channel go's about 4-5 inches lower then the vent opening, with the vent doors removed you can get a small vaccum hose in there. There is actually a water drain hole in the bottom so if you fish around with a length of wire you should eventually find it, make sure you keep them clear if it rains where your at.

I bought pre made cowl guards that were made on a punch press in stead of the mesh screen that was posted, made with 2 different pieces it was about $40 if i remember correct.
__________________
Mike.

Swamp Rat build thread :
http://67-72chevytrucks.com/vboard/s...d.php?t=595019

72 3/4T 4X4
4" BDS Lift
33" BFG's
swamp rat is offline   Reply With Quote