Quote:
Originally Posted by BC10
I have a rear fender that will need to be repaired. I noticed that a lot of the OEM fenders have a little sagging/bend on the top of the fender. What is a good way to fix this?
Maybe hammering it out, and then welding a metal brace or support on the inner side of the fender to hold it up? Anyone ever try this?
|
Stepside fenders bolt through the flange around the perimeter of the fender directly to the bedside with 12 bolts spaced roughly 6 inches apart around the mounting flange. They can't sag unless the bedside is bent and it has stiffeners rolled into the flat side to prevent 'oilcanning'.