Quote:
Originally Posted by Taibo
|
Quote:
Originally Posted by Taibo
Remove the master cylinder from the pedal assy, drill a 1.25 in hole for the master and four bolt 3/8 in holes for the mounting bolts. Bolt the pedal to the firewall from the inside, replace the master cylinder, plumb it and you're done.
|
I know how a clutch mounts to a firewall. I was wondering how it would mount in our trucks and how it would look. It would look really stupid if the Wilwood pedal was low close to the firewall and all the other pedals where in stock location. Also if you don't re-enforce the firewall you will have problems. Do you have any pictures of this set-up in our trucks?