[HUSSEY]

Here are some shots of the cab mounts with the cab bolted in place.





From the top of the frame to the bottom of the cab floor support measures 4 in.







I ran an 11 GA 2x1 rectangular tubing between the two rear cab mounts and bolted to the bottom of the floor.





Measurement for reference. The cab mount height was set to level the cab to the frame.







The front cab mounts bolt to the original front cab mount holes.



The rear cab mounts bolt to one of the original shackle bolt holes. The 2x1 cross bar uses three 3/8 bolts to bolt it to the bottom of the floor.