Quote:
Originally Posted by Eazyrider111
Well I ordered up some mounting brackets. I ordered the ones from POL 63-67 C10 SB/BB mounts and tubular brackets. Hope these work I figure I will have to drill a hole or two in the center support and cut the frame rail about a 1/2" on both sides. If I move the brackets to the forward position I wonder if I will have a enough room for the radiator.?. Captain I cant remember what water pump I have but will figure it out hopefully the short pump. Thanks for the info guys.
|
I used the same POL mounts, moved the mounting location 1" forward of the rear holes and had plenty of clearance for a LWP and plenty of radiator room.
I also had to trim the frame for the POL mounts and the 2" header tubes.