The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - how can i tell if my knockouts for alignment have been "knockedout"

71Seth · 02-17-2004, 11:45 PM

i have a 97 K1500. took it to get an alignment and was told it still had the factory kit in it. this truck has 177,000 miles on it. i bought it at 165,000. While performing a brake job i took a look and looked to me that the cam blots were allready installed. they look like the same thing that i have seen on cars with struts( bolts with off set washers). was i lied to? need some help there is a diffrence of about $90 if they are already in there.
Thanks in Adv.
Seth

02-17-2004, 11:45 PM	#1
71Seth Registered User Join Date: Dec 2002 Location: calvert city, ky Posts: 282	how can i tell if my knockouts for alignment have been "knockedout" i have a 97 K1500. took it to get an alignment and was told it still had the factory kit in it. this truck has 177,000 miles on it. i bought it at 165,000. While performing a brake job i took a look and looked to me that the cam blots were allready installed. they look like the same thing that i have seen on cars with struts( bolts with off set washers). was i lied to? need some help there is a diffrence of about $90 if they are already in there. Thanks in Adv. Seth __________________ 97 ext cab 4x4 04 pontiac grand am 05 honda rancher AT (yellow) 71' C-10 swb sb400 th350 .040, 292 Mag comp cam, high rise Edelbrock w/750 duel feed Holley, Accel super coil and wires, B&M ratchet shifter