The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Newbie 1965 SWB Fleet DD Project

Dweezle · 09-04-2015, 05:50 PM

Forgot to add in the first post that the broken tail pipe has been re-welded to the brace (as seen in the post primer photos), but I'll need to do a better fix at some point. It looks like the PO must have backed into something because the exhaust is bent under the frame, making the pipe that was broken about 5 inches shorter than the undamaged one. Luckily it's not kinked. I've also taken out the parking brake, brake and clutch hardware, cleaned it up and painted it black (as seen in the interior photos).

09-04-2015, 05:50 PM	#4
Dweezle Registered User Join Date: Sep 2015 Location: Las Cruces, NM Posts: 24	Re: Newbie 1965 SWB Fleet DD Project - ROUGH Start Forgot to add in the first post that the broken tail pipe has been re-welded to the brace (as seen in the post primer photos), but I'll need to do a better fix at some point. It looks like the PO must have backed into something because the exhaust is bent under the frame, making the pipe that was broken about 5 inches shorter than the undamaged one. Luckily it's not kinked. I've also taken out the parking brake, brake and clutch hardware, cleaned it up and painted it black (as seen in the interior photos).