The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

03glide · 02-19-2004, 12:36 PM

I have a 68 SWB rolling frame for sale. It has coil sprins and smaller helper springs. 6 lug. There is a front swaybar also. The frame is straight and solid. There is a manual steering box and driveshaft I am leaving with the frame. The 283 will be removed but the sb towers will remain. smitty62 has been asking about a swb frame so he has first shot at it. $200.00. I will leave the running 283 2bbl for another $100.00. I drove the truck before teardown and the engine runs well. Compression readings were between 100 and 110. This engine has an HEI distributor and rams horn exhaust manifolds. Thanks
Brian

02-19-2004, 12:36 PM	#1
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 630	F/s 68 Swb Coil Spring Rolling Frame! I have a 68 SWB rolling frame for sale. It has coil sprins and smaller helper springs. 6 lug. There is a front swaybar also. The frame is straight and solid. There is a manual steering box and driveshaft I am leaving with the frame. The 283 will be removed but the sb towers will remain. smitty62 has been asking about a swb frame so he has first shot at it. $200.00. I will leave the running 283 2bbl for another $100.00. I drove the truck before teardown and the engine runs well. Compression readings were between 100 and 110. This engine has an HEI distributor and rams horn exhaust manifolds. Thanks Brian Attached Images