The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Help identifying tubular A-arms and sway bar I just picked up

trkfrk · 10-04-2015, 03:56 PM

I just picked all of this stuff up from a buddy for a really good price, but I'm not sure who built them. I would really like to see pictures if anyone is using the same setup. The sway bar looks like it was added onto the lowers after they were built. They may be from the same manufacturer or not.. Any help would be appreciated. I'm going to strip them down to have them re-powder coated. The PC is horrible. Sprayed brake clean on them and it just destroys the PC. I'm not bashing anyone, but this is what gives PC a bad name, the PC wasn't cured long enough.

10-04-2015, 03:56 PM	#1
trkfrk Registered User Join Date: Jul 2010 Location: Las Vegas, NV Posts: 969	Help identifying tubular A-arms and sway bar I just picked up I just picked all of this stuff up from a buddy for a really good price, but I'm not sure who built them. I would really like to see pictures if anyone is using the same setup. The sway bar looks like it was added onto the lowers after they were built. They may be from the same manufacturer or not.. Any help would be appreciated. I'm going to strip them down to have them re-powder coated. The PC is horrible. Sprayed brake clean on them and it just destroys the PC. I'm not bashing anyone, but this is what gives PC a bad name, the PC wasn't cured long enough. Attached Images __________________ Mark 1972 C10 SWB LS1/T56 6 speed trans/4:56 posi with 5.5"-7" static drop/Boss 338 Wheels 18"x20" My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=424609. My first start up http://youtu.be/R899YQ1OcjU Last edited by trkfrk; 10-04-2015 at 07:03 PM.