Quote:
Originally Posted by PBFAB.COM
It's actually the sway bar tab on the arm that causes the clearance limitations.
I am sure the tabs could be re-located inboard a little if you wanted to run a narrower sway bar,
Nate
|
Thanks Nate I will look into this when my parts arrive. When I order the Control arms would it be possible for me to get the arms with the sway bar mount tacked on to the arm instead of solid welded?
I am curious to know, If the mounting C/L of the swaybar can somehow be moved rearward on the frame, and have the swaybar end link mount through the plate of the control arm rather than on a tab to the outside of the arm. I am not sure of any bag clearance issues that may come up in this situation.
I thought I saw a post a while back where you mentioned you would be making your sway bars in house or were changing suppliers is this still happening.