|
Re: Welding up the holes where side trim was.
x2 on the copper.
I use a piece of plumbing copper from Home Depot. Hammer one end flat, round the corners, and then put a bend in it to make a spatula.
Works like a charm.
It WILL become a heat-sink though and the handle get hot... I drilled a few holes through the tubing, like the screen on semi truck stacks or the shield on a .50 cal machine gun. They radiate the heat away and you can hold it with your bare hand while welding.
-Brad
__________________
'61 Suburban daily driver: off the road due to 180-pound 8-pt buck!
'62 K-10 long-step project
'61 C30 Camper, aka "Valdez"
There's no cool like Old School
|