Quote:
Originally Posted by oldnslow
I mounted the rectangular tips directly to the U shaped tunnel that I welded into the running board. I added a 10"-12" section of stainless "flex" to allow some movement so nothing cracks. There is about a 3/16" gap between the tip and the notch in the running board to allow some air movement for cooling, it didn't discolor the primer, hopefully won't hurt the paint either. I am going to Locktite the four 1/4 -20 bolts that hold the tips on as they loosened a couple times last year.
|
Good idea about adding the flex piece. I learned the hard way after a cracked tailpipe mount, I went back and added a couple of flex joints.
Looks great
Marc