Re: Harold's '48 S10 LS1 Build
I finished sanding out both fenders around the headlight buckets. I went ahead and removed the passenger side and did some more minor touch ups.
There were some weird wrinkles under the hood lip, left from forming. I went ahead and smoothed those out. I primed the fender with epoxy primer, and applied the first coat of urethane primer.
I put the headlight trim ring in place to take a pic, and damned if one of the tabs broke off when I tried to remove it. It was barely even tack welded to the trim ring. And I had just primed them. Now I get to re-weld it, and redo the primer.
|