Thanks a bunch, Kim!
I ran 3/8" steel line for the Fuel Supply all the way up to through an inline fuel filter from a 90's Chevy Pickup. I didn't have the right crimping tool for the GM fuel line flare with o-rings so I bought the ends from Autozone that came with compression fittings to add it into the line. I don't know why, but I was set on getting an inline filter in there somewhere. I ran it all the way to the front and connected to the fuel pump with about 6-7 inches of rubber hose. I put some unions directly off the tank so I can remove it if necessary. They've proved useful already, I had to take it off for some additional trimming after the install.
I ran a fuel tank vent line down the other side with 5/16" steel tubing. I'm working out specifics for a vapor canister and purge valve to set up so I don't have a fuel smell, if it works out I'll post all of the details about it.