The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Do 90's k1500 6 lug wheels fit a 60-66 C10?

Rust-O-Matic · 10-21-2015, 04:29 PM

Thanks for the input chevy_mike. I was worried about the lug pattern, center hole size, and back spacing, but hadn't even considered the stud length. I wouldn't worry about the short studs if it was just down the street, but this thing is a 125 miles from me. Maybe I better come up with a plan B. Or plan C, because I think B is just multiple tubes of slime.

Were the stock 6 lug rims on a '60-66 15"? All of my '66 stuff is 3/4 ton, so I'm not 100% familiar with the half ton parts. I am actually only wanting to buy this janky old trailer for it's tailgate and front bed panel, to replace the rusted/mangled ones on my 3/4 ton. But, I digress...

10-21-2015, 04:29 PM	#3
Rust-O-Matic Registered User Join Date: Apr 2015 Location: Gallatin, MO Posts: 295	Re: Do 90's k1500 6 lug wheels fit a 60-66 C10? Thanks for the input chevy_mike. I was worried about the lug pattern, center hole size, and back spacing, but hadn't even considered the stud length. I wouldn't worry about the short studs if it was just down the street, but this thing is a 125 miles from me. Maybe I better come up with a plan B. Or plan C, because I think B is just multiple tubes of slime. Were the stock 6 lug rims on a '60-66 15"? All of my '66 stuff is 3/4 ton, so I'm not 100% familiar with the half ton parts. I am actually only wanting to buy this janky old trailer for it's tailgate and front bed panel, to replace the rusted/mangled ones on my 3/4 ton. But, I digress...