|
Re: Welder Question
as stated above by Steven R, it could be rust on the wire which in turn would cause your liner to partially clog and that will make the wire drag and cause that same problem, if its been outside pull the wire out of the liner and shoot some cleaner, not brake cleaner, maybe something like maf sensor cleaner or whatever into the liner until it comes out clean then relube it with mig lube you can get at the welding supply store, that should help solve your popping problem as well and try not to practice on brake drums as mentioned above, ive been in the welding industry for 40 years or so, just a little background on me, good luck
|