|
Re: project 87 done but won't start lol. Help needed
I believe that is the Tach feed from coil. It could easily be the injectors plugged with old fuel have you check to see if you have fuel to the throttle body crack one of the lines loose on back and see if there is fuel I would have ignition off but prime it before you try that way you can tell if there is pressure I can't remember which line is the feed off hand though. Also the injector wiring builds up corrosion and can loose its signal to fire injectors when I first got my 87 it was only running on one injector sounded like a v6 was kinda funny
__________________
<Brandon>
1974 Chevrolet K5 Blazer 350sbc/SM465/NP205, dana44 front, corp 14bolt rear with 4.10s and a powertrax locker, custom rear bumper 400sbc in the works. 
1981 GMC C1500 stepside 250i6, 3spd, 12bolt with 3.08s 2.5/4drop on 15x10 with 275/50r15
81 GMC C3500 cab-chassis dually with utility bed 350sbc, Sm465, 14bolt with 4.10s nv4500 getting ready to go in
1979 Chevrolet K5 R.I.P. http://67-72chevytrucks.com/vboard/s...d.php?t=434096
1976 Chevrolet C10 R.I.P. http://67-72chevytrucks.com/vboard/s...d.php?t=434195
Last edited by bmchevy1979; 10-28-2015 at 09:28 PM.
|