|
Re: LS2 Cam in a Gen3. School Me.
1. No.
2. You will need the front cover from an LS2 also so it is best to buy the cover with the sensor and pigtail. You cannot use the GENIII because of its length. You can make or buy a jumper harness to go to the front cover. If you make one you have to swap the outside 2 wires at the connection to the new sensor if I remember correctly.
3. You are stuck with a 3 bolt cam and sprocket. You need to use the sprocket for the E40 PCM (1x) not the E38 (4x). The 1x sprocket is p/n 12576407
Hope that helps you.
|