[Speedbumpauto]

The pic of my dash above shows them. I'm lucky enough to have a lathe so I copied the stock knobs out of aluminum and polished them. Used a std. push pull switch on the left of the climate control for the fan switch and used a double pole, double throw momentary switch spring loaded to neutral, to the right, for the cut outs open and close. It looks natural in the off position and you have to push it up and down to open and close the cut outs. Modified the toggle handle and put the knob on with JB weld. I did eliminate the center switch ring for the climate control install but saved it in case there is ever a need.