The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

_Ogre · 11-12-2015, 02:14 PM

nature of the beast, same for a bandsaw
when cutting 1/4''x4'' flat bar stock it will cut faster on the 1/4'' side
the less surface contact you have on the blade the faster any saw will cut

square cutting angle should always be cut like this ^
angle cutting you have to cut one leg flat and it will go slow

11-12-2015, 02:14 PM	#2
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,680	Re: metal chop saw ? nature of the beast, same for a bandsaw when cutting 1/4''x4'' flat bar stock it will cut faster on the 1/4'' side the less surface contact you have on the blade the faster any saw will cut square cutting angle should always be cut like this ^ angle cutting you have to cut one leg flat and it will go slow __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer