Quote:
Originally Posted by jonzcustomshop
that might work, I am thinking that the right frame rail is bent up from going in a ditch.
the fender has a kink in it at the cowl panel, the fender well is bent at the hood hinge, and where it bolts to the fire wall is pushed in about 1/8 inch.
you can also see the bottom of the bumper is pushed up and the gap to the door gets bigger at the bottom. on the bolt at the bottom rear of the inner fenderwell you can see that the fender well pulled forward and up a little bit.
for now I don't know if all the frame flexed and all the parts stayed bent , or if the rail is bent too.
I am thinking maybe put it on jackstands at the front body mounts and right before the rear kick up, then level it at the cowl, or roof, then measuring down to a level from certain points on the frame rails and see what I get.
|
I see what you're saying now. Hopefully its nothing too severe. Just let me know if you need anything measured out. Mine is all together so it may be harder to get certain numbers.