[chrismoore701]

I found a 15 amp switchable wire. I installed a painless harness and I have some wires I am not using. This wire is from the fuel pump. Checked it and obviously it is a switchable wire. I have wire coming from my ignition down the column to the neutral switch. that is the solenoid wire. This wire then goes from the neutral switch to the fuse block. Pulled the wire off the neutral switch to the fuse block. Turned key on, touched the feed from the fuel pump to this solenoid wire going to the fuse block and flash. no more fuel pump fuse. Am I missing something? Looking at my painless schematic, I have a 20 amp fuse for the power windows I can use.

Need some more help